REMOVABLE PROSTHESIS
Plate manufacture: :
We pour your impressions upon reception, but in order to give you entire satisfaction and in order to avoid any risk of dimensional variations in your Alginate during transport, we recommend that you:
Pour at least the base of your Alginate impressions.

VERY IMPORTANT : we strongly recommend 1 - Using Xantalgin Crono Alginate from Heraeus Kultzer. Thanks to this product, impressions can be poured up to 5 days after they're made. 2 - Or, before sending your alginate impressions, spray on ALGIRETARD which will conserve their properties for 72 hours. For more information, just ask us.

Make sketches on your plaster model or make a drawing of the plate on our order form.
Moisten and carefully pack your impressions in our boxes to avoid shifting.
Carefully protect your waxes from occlusion
Always send an occlusion record
If possible, avoid using waxes which are easily broken such as MOYCO or Kerr paste which often arrive in poor condition. For removable prostheses, these can be manufactured in several phases. In this case, please use a new order form for each phase.

Previous

Next

Removable prosthesis : Resin
Wax try-in: use the manufacturing codes 2700 to 2730.
Resin finishing: use the manufacturing code 2800 to 2830.
NOTE :
Complete plates are always manufactured with an intermediate step with a wax try-in.

Removable prosthesis : Stellite
2 possibilities :
Manufacture of a single bare metal plate: manufacturing code 2010, billed at the current rate
Stellite completely manufactured by Labocast: manufacturing codes 2600 to 2620. Check the boxes according to the steps to be carried out.
NOTE :
In the case of a Stellite in an intermediate try-in stage, use the same order number until the product is finished.

Titane :
The use of a ceramic on a titanium alloy enables work to be performed on an implant or a natural tooth and the replacement of semi-precious or precious metals. This bio-compatible alloy decreases the risk of allergy.
2 possibilities :
Bare metal plate only: work codes 2010 + 2000TITAP or 2000TITAA or 000TITAF.

Plate, mounting, finishing: work codes 2600 to 2620 + 2000TITAP or 2000TITAA or 2000TITAF.

Removable prosthesis : Teeth
The price of our stellite and resin prostheses includes COSMO HXL (Detrey, USA) whose quality is excellent or MULICOLOR (Tritech, Germany)
BIOPLUS and ARTIPLUS (Detrey, USA) or VITAPAN (Vita Germany) teeth are available for an extra charge.
** Always use the Vita Lumin Vaccum ceramic shade guide.